LED PAR20 PAR30 PAR38 SMD Light Good Heat Dispersion E27/E26/B22
Replace PAR Halogen High Lumen 3 Years Warranty
Application Of LED PAR30 PAR20 PAR38 Light:
SMD LED PAR20 PAR30 PAR38 bulbs measure just under 4 inches in
diameter allowing them to fit into 4 inch recessed can lights and
spotlight fixtures too small for a PAR38 bulb.
Short neck bulbs are specially designed for shallow fixtures, so
these are often used for track lighting.
Some PAR30 bulbs are UL listed for wet locations, meaning they can
be used outdoors and do not require protection from direct exposure
to water.
Look for the Safety Rating in the Specifications of each product
page if this is important to you.
Many of the bulbs are also dimmable when paired with a compatible
LED dimmer.
Because not all PAR20 PAR30 PAR30 SMD LEDs work with all LED
dimmers, each bulb has a Dimmer Compatibility PDF under Brochures
and Spec Sheets so that you can make sure your new lights will work
with your existing dimmers.
Need some help finding the right product for your installation?
Give one of our lighting experts a call. We'll be happy to walk you
through all of your options.
Features of LED PAR Light:
1. SMD PAR20 PAR30 PAR38 LED bulbs are an energy efficient
replacement for halogen bulbs.
To help you find the right replacement, the category is broken out
by halogen wattage equivalent.
For example, an 120 Watt Traditional Halogen Lamps is equal PAR30
LED bulb may only use 18.5 Watts for over 84% energy savings.
While the up-front cost of LEDs is higher than halogen bulbs, they
need to be replaced far less frequently.
With halogen bulbs only lasting 1500 to 2000 hours, an LED PAR30
that lasts 35,000 hours is a worthy investment.
You would need to replace a halogen 17-23 times before replacing
one LED bulb.
2. PAR20 PAR30 PAR38 LED Lights Short Neck LED Beam Angles and
Color Temperature
PAR shaped bulbs are often used for more controlled directional
lighting compared to BR shaped bulbs or for general illumination.
3. PAR30 short neck LEDs give you a wide range of options
categorized as follows:
Narrow Spot: less than 10 degree beam angle
Spot: 12/24/36 degree beam angle
Narrow Flood: 25 degree beam angle
Flood: 36 degree beam angle
Wide Flood: greater than 50 degree beam angle
4. Color temperature is a measure of how yellow or blue a light the
bulb puts out.
This is another advantage of using LED lighting over halogens,
which can only produce light in the 3000 Kelvin range.
LEDs give you more flexibility to choose how warm or cool a light
to use in your displays.
Higher Kelvin temperatures appear crisper, brighter, and are on the
blue end of the Kelvin scale. Lower Kelvin temperatures are warmer,
closer to the light output from a halogen or incandescent bulb.
A 3000 Kelvin PAR30 is the closest direct replacement for halogen
if you want to keep that familiar look.
We recommend 3000 Kelvin and lower for landscape lighting because
flowers, grass, and trees will look unnatural under the higher
Kelvin light while it matters less for statues and stonework.
For display lighting or track lighting, higher temperatures may be
used, but we recommend sticking to the lower Kelvin bulbs for
recessed lighting or ambient lighting.
5. High CRI Bulbs
Another measurement that changes the appearance of the light from
your bulbs is CRI, a measure of how accurately a light bulb
displays colors compared to the midday sun.
LED PAR Light SMD Bulbs with a higher CRI provide a more vivid
light, especially reds and flesh tones.
Although LEDs cannot yet match the 100 CRI of halogen bulbs, a CRI
of 90 or above is considered
excellent. For many applications, especially landscape lighting, a
CRI of 80 is enough.
Product Parameter:
| Pictures | Model | Power | Size(D*H) | Base | Chips | Efficiency |
 | SK-PAR20-001SMD-8W | 8W | 63.5*85.2mm | E27/E26/B22 | 3030SMD | >90lm/w |
|
|
 | SK-PAR30-001SMD-9W | 9W | 92*90mm | E27/E26/B22 | 3030SMD | >90lm/w |
| SK-PAR30-001SMD-12W | 12W | 92*90mm Or 95*92mm |
| SK-PAR30-001SMD-15W | 15W |
 | SK-PAR30-001SMD-9W-H | 9W | 92*114mm | E27/E26/B22 | 3030SMD | >90lm/w |
|
| SK-PAR30-001SMD-12W-H | 12W |
 | SK-PAR38-001SMD-18W | 18W | 120*133mm Or 121*127mm | E27/E26/B22 | 3030SMD | >90lm/w |
|
| SK-PAR38-001SMD-20W | 20W |
Maintenance / Repairing Instructions:
1.Make sure LED PAR20/PAR30/PAR38 Light has been turned off before
maintenance or repairing.
2.Clean the LED SMD PAR Lights cover regularly to maintain high
transmission of light.
3.Clean up the LED PAR38 E27/B22/E26 Lamp dust from the cover and
heatsink regularly to keep sound heat dispersion.
4.Be careful not to use water or corrosive solution for cleaning
LED 20W PAR Light, preferably with a dry cloth.(It is not
Waterproof tubes,These LED PAR20 PAR30 PAR38 Lights IP40, forbit to
use with rainy or water).
LED PAR Lights Production Imagie:
